Pramāṇa · Search · About · API

Vastu-shastra (Vol. I: Hindu Science of Architecture; Vol. II: Hindu Canons of Iconography and Painting) v2.c74.s2.175

Vāstu-śāstra (Vol. I: Hindu Science of Architecture; Vol. II: Hindu Canons of Iconography and Painting) v2.c74.s2.175

Language
English

v2.c74.s2.175

Sri S. K. Saraswatī has the credit to point out, for the first time, the passage of Abhilaṣitārthacintāmaṇi—vide J. I. S. O. A. Vol. IV. No. 2 p. 139 ff—'An ancient text on the casting of metal images'. Dr. J. N. Bannerjea (D. H. I. p. 213-4) has also utilised this text as translated by Sri S. K. Sarasvatī. The text [cf. Pr. Lakṣ. p. 34 (a)] first refers to the preparation of the image (*i. e.* the model, evidently made of wax though not expressly said so here) complete with all the details, according to the navatāla measurement; then instructions are given about the placing of wax-tubes on its back, shoulders and the neck or crown and besmearing it with refined clay in three layers. Rules for the preparation of the clay are given in detail. The clay coatings should be made in regular intervals and be carefully dried up in the shade. The textual injunction to be noted is that the amount of wax used to prepare the model should be weighed in the very beginning by the wise artist..... Then the particular metal out of which the casting is to be done should be measured according to certain proportions; if the image is to be made of brass or copper, the metal should weigh ten times (or eight times according to a varient reading), if of silver, twelve times, and if of gold, sixteen times, the weight of the wax model, according to the specific gravity of the metals. Then the measured metal should be encased in a cocoanut-shaped earthen crucible......, and the wax from the clay-coated mould should be melted away by heating the image in fire. The crucible with the metal within ought to be so heated that the latter may form a liquid mass, then after puncturing the top of the crucible with an iron rod, the whole molten metal should be carefully poured down the mouth of the tube. When the molten metal has congealed after cooling down, the clay coating should be broken up very carefully. Any superfluous metal and tubes adhering to the fully fashioned metal image should be filed away with a cāraṇa (a file ?), and lastly the whole should be brightly polished......'—Bannerjea. This is the technique of the solid cast.