Pramāṇa · Search · About · API

Vastu-shastra (Vol. I: Hindu Science of Architecture; Vol. II: Hindu Canons of Iconography and Painting) v2.c74.s2.177

Vāstu-śāstra (Vol. I: Hindu Science of Architecture; Vol. II: Hindu Canons of Iconography and Painting) v2.c74.s2.177

Language
English

v2.c74.s2.177

Let a wax-model be prepared first, of an image (either a ‘Bimba’ or a Liṅga’) ; then a sufficiently strong clay coating be overlaid and dried up, wax should then be removed. In that model then liquid iron or any other metal—gold or silver or bronze, etc.—is filled up. Now I am going to describe the technique of this casting for the benefit of workmen. There are five types of clay compounds to be used for a coating in a cast-image : ‘kaṭhinā’ (hard) ; manda-kaṭhinā (medium-hard) : mṛdvī (soft) ; mṛdutarā (softer) and mūṣākaranayogyā (clay fit for making a crucible—cf. writer’s ‘Hindu science of Architecutre’, where the architecutural connotation of this word is expounded for the first time). Of these the first type is prepared of ordinary clay or that got from ant-hills (nakuja) and it has to be made fit for besmearing, by thoroughly mixing it with finely powdered brick-dust, pure water and extracts of arecanut or betelnut husks and it has also to be beaten down by a stone-pestle to make it hard. If, however, the second variety, *i. e.* medium hard, is desired, the above compound should be mixed up with cowdung. Further again if the third type of clay compound is aimed at, it is constituted by finely powdered dust of earthen pots (*i. e.* ground in a grinding stone) mixed with clay in proportion of one to four. If cowdung is added to this compound, the fourth variety is constituted. Lastly, the fifth is made by mixing charred husk, earthen pot dust and desiccated (*i. e.* pounded up by pestle) cotton cloth all in equal proportions and all finely powdered.