Vastu-shastra (Vol. I: Hindu Science of Architecture; Vol. II: Hindu Canons of Iconography and Painting) v2.c74.s2.179
Vāstu-śāstra (Vol. I: Hindu Science of Architecture; Vol. II: Hindu Canons of Iconography and Painting) v2.c74.s2.179
- Language
- English
v2.c74.s2.179
Now in the end, to make it soft, it should be besmeared with an essence of cowdung. Thus prepared (the model) a wax-plate, along with the desired metal in proper proportion with all the characteristic signs of the image (aimed at) should be overlaid. As regards the ornaments and other decorations or symbols they may be cast either by a wire of the wax itself or by tānta (tintinīsāra); or again by a bamboo-fibre (veṇu-sara). Thus carved out with all the characteristic symbols as well as the weapons also, it should now be made well glossed and again a liquid clay coating of the softer type be given in more than one succession. When got dried up, it should be again besmeared with the soft variety of clay compound and be left for being dried up. Thus made hard enough it should now be tied up with black iron plates; again a claycoating of the hard variety should be given in such a proportion with which it may endure—this coating process may be continued in succession. On the minor limbs of the image the iron-line (loha-paddhati) is the rule. Thus dried up, it should be put on the furnace which is duly lit up with fire and the model covered up with the firelogs.