The Beads from Taxila (MASI 65) c2.s1.4
The Beads from Taxila (MASI 65) c2.s1.4
- Language
- English
c2.s1.4
² The process as practised at Sehwān in Sind until a generation ago, is described by the late Mr. N. G. Majumdar as follows: “Put half a chhatak of washing soda in 2 tolas of water, and allow it to dissolve in a cup. Take some soft twigs of kinar (=capparis aphylla, a bush which grows wild in Sind and South-western Punjab), and rub pieces of them in the liquid, bringing the liquid to the required consistency and refining it through a piece of linen. Mix cotton wool with potters’ clay and pound it in an iron or pottery vessel so as to make it soft like wax. Prepare a mould of this clay and put the carnelian to be decorated in it, leaving the face to be decorated exposed. Dry it in the sun. Then draw or write whatever is desired on the carnelian with a reed or steel pen, using the aforesaid liquid. Let it dry in the air. Then fire it between two layers of charcoal. Keep the mould under a lid for cooling. Then take out the carnelian from the mould and clean the soot from its body. The decoration by this time has become milky white, and is permanently etched on the carnelian.”—[J. M.]